Domain Member Mode - Quasarbiz JS100 User Manual

Although the JS100 unit can be in only one domain at a time, you can configure the unit to connect
to up to two different domains. This allows you to easily switch between the two domains using the
same user name and password.
To configure a JS100unit as a member of a domain
1 Select the Domain Member Mode check box.
2 Type the domain name in the Domain Name box.
WINDOWS SETUP PAGE PIC
If the JS100 unit is recognized in this domain, the unit rejoins the domain without your having to
authenticate. Otherwise, you must type the domain administrator user name in the Admin User
box and the password in the Admin Password box.
Page
18
©2005 Quasarbiz Document: VS100UM101