MobileDemand xTablet T7000 Installation Instructions

Office dock latch and extension

Hide thumbs Also See for xTablet T7000:

Download this manual

Enlarged version

Attaching the Spacer and Latch

A 6-hole spacer is provided to properly position

the latch.

To attach the spacer and latch

1. Align the holes of the spacer with the holes

(with nuts) on the plate – opposite the side

with the nuts.

2. Align the six holes in the latch with the holes

in the spacer.

3. Insert the six m2.5 x 10 mm screws and

tighten into place.

Note: The proper position of the spacer is

between the latch and the plate.

Locking in the xTablet T7000

You will need to lock the xTablet T7000 (with or

without the QWERTY keyboard) into the T7000

Office Dock correctly for successful use.

To lock in the xTablet T7000

1. The cradle must be upright.

2. The xTablet T7000 is secure in the cradle

seat.

3. The top cradle latch is secured onto the

xTablet T7000.

Find the latest updates in the Support section in the

MobileDemand website at: www.mobiledemand.com.

Questions? Call MobileDemand Support at 877-784-4338

xTablet T7000

Office Dock Latch

and Extension

Installation Instructions

Last Updated: October 13, 2010

Page 1 Attaching the Spacer and Latch Locking in the xTablet T7000 A 6-hole spacer is provided to properly position You will need to lock the xTablet T7000 (with or the latch. without the QWERTY keyboard) into the T7000 Office Dock correctly for successful use.
Page 2 T7000 xTablet T7000 Office Dock Latch Removing the T7000 Office Dock Latch Office Dock Latch Extension. For your xTablet T7000 unit, you will need to use You will need to remove the latch from the latch the following parts: base.