L10/ L15/ L20H Operation; Turning The Appliance On; Air-Conditioning Mode - DeLonghi Pinguino PAC L10 Instruction Manual

TURNING THE APPLIANCE ON

Plug the appliance into the mains.
Two lines appear on the display indicating that the appliance is
in standby.
Press the ON/OFF button (A) (when turned on, the air conditioning unit
starts operating in the same mode as when it was turned off).
Press the MODE (B) button until the indicator light corresponding
to the required mode lights up:
Indicator light (C):
Indicator light (D):
Indicator light (E) :

AIR-CONDITIONING MODE

Ideal for hot humid weather when you need to cool and dehu-
midify the room.
To set the operation of the appliance correctly, press the + (F) or
- (I) buttons until the desired temperature is displayed.
Then select the fan speed by pressing the FAN button (P) until the
indicator light corresponding to the required fan speed lights up
MAX: the air conditioning unit operates at maximum to reach
the required temperature as rapidly as possible
MIN: reduces noise levels but still maintains a good level of
comfort
QUIET: for silent operation
AUTO: the appliance automatically selects the most suitable
fan speed in relation to the temperature set on the digi-
tal display.
The most suitable temperature for the room during the summer
varies from 24 to 27°C.
You are recommended, however, not to set a temperature much
below the outside temperature.
24

L10/ L15/ L20H operation

air-conditioning mode
fan mode
heating mode (model L20H only)
25