Advertisement

• This appliance is designed for home air conditioning and must not be used for other purposes.
• It is dangerous to modify or alter the characteristics of the appliance in any way.
• The appliance must be installed in conformity with legislation in force in the country concerned.
• If the appliance requires repair, contact a Service Centre authorised by the manufacturer only.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• This air conditioning unit must be used by adults only. Never allow children to play with the applian-
ce.
• This appliance is designed for home air conditioning and must not be used for other purposes.
• Do not allow children to play with the appliance.
• The appliance must be connected to an efficient earth system.
• Have your electrical circuit checked by a qualified electrician.
• Do not use extension cables.
• Before cleaning or maintenance operations, always unplug the appliance from the mains socket.
• Do not move the appliance by pulling the power cable.
• Do not install the appliance in rooms containing gas, oil or sulphur. Do not install near sources of heat.
• Do not rest heavy or hot objects on top of the appliance.
• Clean the anti-microbial filters at least once a week.
• Avoid using heating appliances near the air conditioning unit.
• Always transport the appliance upright or resting on one side.
• Use the appliance as described in this instruction manual only.
• As with any electrical appliance, while the instructions aim to cover as many eventualities as possible,
caution and common sense should be used when operating and installing this air conditioning unit.
• At the end of its working life, take the appliance to a special collection centre.
• The materials used for packaging can be recycled. You are therefore recommended to dispose of
them in special differentiated waste collection containers.
When putting the appliance away, do not cover with plastic bags.
• The refrigerant gas R407c conforms to EC regulations on the environment.
• Avoid perforating the refrigerant circuit of the appliance.
• Keep the appliance at least 50 cm away from flammable substances (alcohol etc) or pressurised
containers (e.g. aerosol cans).
DESCRIPTION
1
air outlet grille
2 control panel
3 castors
4 handles
5 evaporator air intake grille
6 air exhaust hose housing
7 condenser air intake grille
8 drain hose cover
9 power cable
10 flange cap
11 air exhaust hose
W a r n i n g s
12 window outlet
13 suckers
14 castor locks
15 remote control unit (model L30/L40only)
19

Advertisement

Table of Contents
loading

Summary of Contents for DeLonghi Pinguino PAC L10

  • Page 1 W a r n i n g s • This appliance is designed for home air conditioning and must not be used for other purposes. • It is dangerous to modify or alter the characteristics of the appliance in any way. •...
  • Page 2 What are the Pinguino and SuperPinguino? uring the summer, you feel comfortable at a temperature of between 24 and 27° C with a relative humidity of about 50%. An air conditioning unit removes excess moisture and heat from the room where it is located. Compared with installed models, portable air conditioning units have the advantage that they can be moved from one room to another in the home or be transported from one building to another.
  • Page 3 Pre p a r i n g f o r u s e ELECTRICAL CONNECTIONS Before plugging the appliance into the mains socket, check that: • the mains power supply corresponds to the value indicated on the rating plate on the back of the appliance; •...
  • Page 4 Pre p a r i n g f o r u s e AIR-CONDITIONING WITH INSTALLATION • Fit the flange accessory provided in If required, the Pinguino can also be installed the hole semi-permanently (Fig. D). • Fit the hose in the housing at the back of the appliance (fig.
  • Page 5 Control panel L10/L15/L20H MODELS L10/ L15/L20H THE CONTROL PANEL DESCRIPTION OF THE CONTROL PANEL A ON/OFF button B Mode selection button Conditioning, fan, heating (L20H only). C Air conditioning mode indicator light D Fan mode indicator light E Heating mode indicator light (L20H only) F Increase temperature/ programmed operating time button G Timer in operation indicator light H Display Displays the temperature values set and the programmed operating time...
  • Page 6 L10/ L15/ L20H operation TURNING THE APPLIANCE ON Plug the appliance into the mains. Two lines appear on the display indicating that the appliance is in standby. Press the ON/OFF button (A) (when turned on, the air conditioning unit starts operating in the same mode as when it was turned off). Press the MODE (B) button until the indicator light corresponding to the required mode lights up: Indicator light (C):...
  • Page 7 L10/ L15/ L20H operation FAN MODE Adjust fan speed by pressing the FAN button (P) as described for the air-conditioning mode. Remember that the higher the speed, the more air is filtered. If you select "Quiet" speed, less air is filtered but the appliance is also less noisy.
  • Page 8 L10/L15/L20H self diagnosis SELF DIAGNOSIS The appliance has a self diagnosis system to identify a number of malfunctions. …WHAT SHOULD YOU DO? When the appliance is operating in air conditioning mode, this device pre- vents the formation of ice. LOW TEMPERATURE The appliance starts up again automatically when the defrosting process is (frost prevention) completed.
  • Page 9 Control panel L30/L40 MODELS L30/L40 THE CONTROL PANEL DESCRIPTION OF THE CONTROL PANEL R Air-conditioning/fan mode indicator light S Timer indicator light Remote control receiver U Full tank alarm indicator light V Power indicator light Z Mode selection button CORRECT USE •...
  • Page 10 L30/L40 operation TURNING THE APPLIANCE ON Plug the appliance into the mains. Press the ON/OFF button (17) (when turned on, the air conditioning unit starts operating in the same mode as when it was turned off). Press the MODE (18) button to select the required mode AIR-CONDITIONING (COOL) FAN ONLY (FAN) An arrow on the display indicates the selected mode.
  • Page 11 L30/L40 operation Programming delayed start-up • With the air-conditioning unit off, press the TIMER button: the display shows a flashing arrow indi- cating “TIMER ON”. Now make all the desired settings for when the appliance will switch on (operating mode, fan speed and temperature).
  • Page 12 T i p s To get the best from your air conditioning unit, • Never use the appliance in very damp follow these recommendations: rooms (laundries for example). • Never use the appliance outdoors. • close the windows and doors in the room to be air conditioned.
  • Page 13 C l e a n i n g Before cleaning or maintenance, turn the Use a vacuum cleaner to remove the dust appliance off by pressing the ON/OFF button collected on the filter. (A) (in models L10,L15 and L20H) or button If it is very dirty, immerse in warm water and (17) on the remote control (in models L30 and rinse a number of times.
  • Page 14: Troubleshooting

    Troubleshooting PROBLEM CAUSE REMEDY The air conditioning • no electricity • wait • it is not plugged into the mains • plug into the mains unit does not start • the safety device has tripped • contact your service centre The air conditioning •...
  • Page 15 Guarantee/technical specification GUARANTEE AND TECHNICAL ASSISTANCE TECHNICAL SPECIFICATION Power supply The conditions of the guarantee and techni- voltage see rating plate cal assistance are given on the certificate Max. power input supplied with your appliance. during air conditioning “ Max. power input during heating (mod.

Table of Contents