L30/L40 Self-Diagnosis; Programming Delayed Start-Up - DeLonghi Pinguino PAC L10 Instruction Manual

Programming delayed start-up

• With the air-conditioning unit off, press the TIMER button: the display shows a flashing arrow indi-
cating "TIMER ON".
Now make all the desired settings for when the appliance will switch on (operating mode, fan
speed and temperature).
Confirm the settings by pressing the TIMER button.
The time is displayed and the "h" symbol flashes.
Set the time when you want the appliance to switch off using the
to 24 hours).
During the first ten hours, you can select half hour intervals.
For times greater than ten hours, one hour intervals can be selected.
• Press the TIMER button again to confirm the start-up time.
A beep sounds and the timer light (S) on the control panel comes on to confirm the setting of
the timer.
A countdown of the time left is displayed.
• At the end of the set time the appliance switches on automatically, with the settings made
previously.
• To cancel the set time, press the TIMER button again: a beep will sound and the light (S) on the
control panel will go off.
SELF DIAGNOSIS
The appliance has a self diagnosis system to identify a number of malfunctions. If these faults
occur, the air-conditioner will shut down.
IF THE LIGHT (U) ...
FLASHES TWICE
(The tank is full)
FLASHES ONCE
(The probe is damaged)
L30/L40 operation
Empty the internal safety tank, through the drain hoses.
(see page 31 "end of season operations"
If this alarm appears, contact the service centre.
...WHAT SHOULD YOU DO?
buttons (from 30 minutes
29