Settings On Control Display - BMW 525i Owner's Manual

Stopwatch
iDrive, for concept, refer to page 16.
1. Open the start menu.
2. Open "Navigation".
On vehicles without navigation system
Open "Car Data".
3. Select "Car Data" and press the controller.
4. Select "Stopwatch" and press the control-
ler.
Starting, stopping or resetting
> Select "Start" and press the controller.
The stopwatch starts at the displayed time.
> Select "Reset" and press the controller.
The stopwatch is reset and it restarts if it
was running beforehand.
> Select "Stop" and press the controller.
This stops the timer.
Taking an intermediate time reading
Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.
All of the remaining functions remain
available at all times while the stopwatch
is running. The stopwatch continues operation
in the background.<
Online Edition for Part-No. 01 41 0 159 251 © 03/05 BMW AG

Settings on Control Display

1. Press the
This opens the start menu.
*
:
2. Press the controller to open the menu.
3. Select "Display settings" and press the
controller.
Brightness of Control Display
The brightness is automatically adapted to the
ambient lighting conditions. However, you can
change the basic setting.
1. Select "Brightness" and press the control-
ler.
2. If necessary, move the controller to the right
to select "Display".
3. Turn the controller until the desired setting
is selected.
The setting is stored for the remote control cur-
rently in use.
button.
79