Displaying Current Position - BMW 525i Owner's Manual

The setting is stored for the remote control
currently in use.
Bypassing route sections
During destination guidance, you can revise the
navigation system's route recommendations to
avoid particular stretches of road. Enter the
number of miles/kilometers that you want to
travel before returning to the original route.
1. Select "Navigation" and press the control-
ler.
2. Move controller toward rear so that the
marking is located in the third field from the
top. Turn the controller until "New route"
is selected and press the controller.
3. Turn the controller to enter the desired
number and press the controller.
The route is recalculated.
To exit from the menu without changing the
route:
Select the arrow and press the controller.
Online Edition for Part-No. 01 41 0 159 251 © 03/05 BMW AG

Displaying current position

You can have your current position displayed
even when the destination guidance is
switched off.
1. Select "Navigation" and press the control-
ler.
2. Move controller toward rear twice so that
the marking is located in the fourth field
from the top. Turn the controller until
"Current position" is selected and press
the controller.
The current position of your BMW is displayed.
If the navigation system is unable to identify a
town or city, your current map coordinates will
appear.
To exit the menu:
Select the arrow and press the controller.
You can also have the current position dis-
played on a map, refer to page 136.
139