Enabling or disabling channels
iDrive, for concept, refer to page 16.
1.
Press the
button.
This opens the start menu.
2.
Move the controller back to open "Enter-
tainment".
3.
Select "SAT".
4.
Press the controller.
The channels are displayed.
These channels are enabled.
154
Online Edition for Part-No. 01 41 0 159 251 © 03/05 BMW AG
Enabling
1.
Select a channel that has not yet been
enabled and press the controller.
A telephone number and the electronic
serial number, ESN, are displayed.
The electronic serial number is
required to enable or
2.
To enable the channels:
Dial the phone number.
Disabling
1.
Select an enabled channel and press the
controller.
2.
Select "ESN" and press the controller.
The electronic serial number, ESN, is
displayed.
The electronic serial number is
required for
disabling.<
3.
To disable the channels:
Dial the phone number.
Selecting and storing channel
1.
Select "SAT" and press the controller.
Channels are shown on the Control Display
sorted on the basis of selection criteria.
disable.<