Settings On Control Display - BMW 525i Owner's Manual

Activating limit
Control Center, for principle details, refer to
page 16:
1. Open "Navigation".
On vehicles without navigation system:
open "Car Data"
2. Select "Car Data" and press the con-
troller
3. Select "Limit" and press the controller
4. Select "On" and press the controller.
Limit is activated.
Stopwatch
Control Center, for principle details, refer to
page 16:
1. Open "Navigation".
On vehicles without navigation system:
open "Car Data"
2. Select "Car Data" and press the con-
troller
3. Select "Stopwatch" and press the con-
troller.
Starting and stopping
Select "Start" and press the controller
>
The stopwatch starts at the displayed
time
Select "Reset" and press the controller
>
The stopwatch is reset and it restarts if
it was running beforehand
Select "Stop" and press the controller
>
This stops the timer.
72
Taking an intermediate time reading
Select "Interim time" and press the control-
ler. This intermediate time appears below
the ongoing primary stopwatch count.
watch is running. The stopwatch continues
operation in the

Settings on Control Display

Brightness of Control Display
The brightness is automatically adapted to
the ambient lighting conditions. However,
you can change the base setting.
Control Center, for principle details, refer to
page 16:
1.
2.
3.
4.
5.
6.
Online Edition for Part No. 01 41 0 158 159 - © 02/04 BMW AG
All of the remaining functions remain
available at all times while the stop-
background.<
Press button.
The start menu is opened
Press the controller to open the
Select "Display settings" and press the
controller
Select "Brightness" and press the con-
troller
If necessary, move the controller to the
right to select "Display Offset"
Turn the controller until the desired set-
ting is selected.
menu