Warning Lamps - BMW 525i Owner's Manual

Hide thumbs Also See for 525i:
Table of Contents

Advertisement

Deactivate system
Press the lever up or down. The displays in the
instrument cluster disappear.
You also deactivate the system when you
brake, shift very slowly or into neutral, or
engage the selector lever position N. In addi-
tion, the system is deactivated automatically:
>
When you activate the DTC Dynamic
Traction Control
>
When you deactivate the DSC Dynamic
Stability Control
>
When the system does not recognize any
objects for a longer time, e.g. on infre-
quently traveled roads without a shoulder or
guard rails, or if the radar sensor is covered
with dirt, refer to page
>
When the speed is reduced to below
20 mph/30 km/h due to a traffic situation
The system deactivates automatically
when the speed is set to below 20 mph/
30 km/h. A signal sounds and a message
appears in the Control Display. The active inter-
vention of the driver is required, otherwise acci-
dents can
occur.<
Resume stored desired speed and
distance
Press button 4.
The displays appear in the instrument cluster.
When you switch off the ignition, the stored
desired speed is deleted.
Online Edition for Part-No. 01 41 0 159 251 © 03/05 BMW AG
68
Displays in instrument cluster
1
Stored desired speed
2
Lights up yellow: vehicle driving ahead is
detected
Flashes red, a signal sounds: the system
cannot establish the distance, apply the
brakes yourself
Flashes yellow: driving stability control sys-
tems intervene, the active cruise control is
deactivated
3
Selected distance to vehicle driving ahead:
lights up as soon as the system is activated
4
Selected desired speed appears briefly
If the display ACC --- mph/km/h briefly
appears in the instrument cluster, it might
be that conditions necessary for operation are
not currently being met. To call up Check Con-
trol messages, refer to page

Warning lamps

The display 2 flashes red and a
signal sounds.
The system requests that you
intervene by braking or with an
evasive maneuver. The active
cruise control cannot automatically restore the
distance to the vehicle driving ahead.
However, this display cannot relieve the driver
of the responsibility for adjusting the desired
speed and driving style to the traffic conditions.
The display 2 flashes yellow.
Automatic intervention by ABS or
DSC. The active cruise control
intervenes by braking until you
take over actively.
76.<
67

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

530i545i525xi530xi

Table of Contents