Settings On Control Display - BMW 2009 M5 Owner's Manual

5. Select the speed value and press the con-
troller.
6. Turn the controller to set the limit.
7. Press the controller to apply the setting.
The limit is activated.
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system adopts your current
speed as the limit.
Activating/deactivating the limit
Select "On" and press the controller.
The limit is activated.
Stopwatch
iDrive, for operating principle refer to page 16.
1. Open the start menu.
2. Open "Navigation".
Without navigation system
Open "Car Data".
3. Select "Car Data" and press the controller.
4. Select "Stopwatch" and press the control-
ler.
Starting, stopping or resetting
> Select "Start" and press the controller.
The stopwatch starts at the displayed time.
> Select "Reset" and press the controller.
The stopwatch is reset and it restarts if it
was running beforehand.
> Select "Stop" and press the controller.
This stops the timer.
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG
Taking an intermediate time reading
Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.
stopwatch continues operation in the back-
ground.<

Settings on Control Display

iDrive, for operating principle refer to page 16.
1.
*
:
2.
3.
All of the other functions remain available
even while the stopwatch is running. The
Press the button once or twice until
the start menu appears.
Press the controller to open the menu.
Turn the controller until "Settings" is
selected and press the controller.
75