Breakdown Assistance - BMW 525i Owner's Manual

5. Select "Service Status" and press the con-
troller.
6. Select "Enable services" and press the con-
troller.
TeleService and, if applicable, BMW Assist
are enabled; data exchange with the service
center starts.
Enabling takes a few minutes. The status is dis-
played on the Control Display. If you open
another menu, the enable process continue to
run in the background.
Services offered
The following special features apply for the
services of TeleService and BMW Assist:
> The services offered are country-specific.
>
Voice contact is established or data are
transferred, depending on the equipment
and the country. In some countries, it is also
possible to do both.
> The data transferred can be the vehicle
data, your current position or the data of the
CBS Condition Based Service.
176
Online Edition for Part-No. 01 41 0 159 251 © 03/05 BMW AG
Automatic service notification*
The data on the service status of your vehicle or
on legally mandated inspections is transmitted
automatically directly to your BMW center prior
to the due date. You can check when the BMW
center was notified.
iDrive, for concept, refer to page 16.
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Service" and press the controller.
4. Select "Service requirements" and press
the controller.
5. Select "Service notification" and press the
controller.

Breakdown assistance

You can call Roadside Assistance
BMW Group should you require help in the
event of a breakdown.
iDrive, for concept, refer to page 16.
1. Press the button.
This opens the start menu.
2. Move the controller forward to select
"Communication".
3. Select "BMW Assist" and press the control-
ler.
*
of the