Cuddeback EXPERT Owner's Manual page 40

Capture Mo
Motion
Capture Mo
TimeLpse
Capture Mo
Both
Capture Mode. This selects what type of action will
trigger an image. The options are Motion, Time
Lapse, Both.
➢ Motion - Cuddeback will activate the camera
when it senses an animal/person with its
Figure 70 motion/heat sensor. This is the setting you use
to photograph animals that travel past
Cuddeback
➢ Time Lapse - Cuddeback will activate the cam-
era on a time lapse interval. In this mode the
motion/heat sensor is disabled. If an animal trav-
els past Cuddeback an image will NOT be taken
(figure
Figure 71
➢ Both - Cuddeback will activate the camera when
it senses an animal and on the programmed
time lapse interval
1) Press
Setup? C = Yes] is displayed.
2) Press
Figure 72
the second line of the display the current mode
will displayed (Motion, TimeLpse, or Both).
3) Press
LEARN - Press (UP) 3 times to see all the available settings
described above.
If you enable time lapse photography you will then
need to program the Time Lapse Interval and Time
Lapse Start Time.
(Note - the next two setting will only appear if
Capture Mode is Time Lapse or Both).
(figure 70).
71).
(figure
numerous times until [Camera
. [Capture Mode] will be displayed. On
or to change the setting.
40
72).