Setting The Flash Power - Cuddeback EXPERT Owner's Manual

1) Press numerous times until [Camera Setup?
C = Yes] is displayed
2) Press .
3) Press numerous times until [Flash Mode] is
displayed (figure
4) Press or

SETTING THE FLASH POWER

Cuddeback's built in flash can be programmed for
high power or standard power. Standard will provide
the highest quality image.
High will provide a greater flash distance.
1) Press numerous times until [Camera Setup?
C = Yes] is displayed.
2) Press .
3) Press numerous times until [Flash Power] is
displayed (figure
4) Press or
(figure 50).
51).
to change the setting.
52).
to change the setting.
Camera Set
Flash Mode
Flash Power
31
C = Yes
Figure 50
Auto
Figure 51
Standard
Figure 52