Cuddeback EXPERT Owner's Manual page 24

LEARN - When setting a password
(DOWN) changes the number and
(UP) advances to the next position.
New OPW
<0
4) Follow these steps to enter the default password
of 00000.
5)
>
Figure 38
LEARN - You have now successfully entered the default
Owner Password of 00000. You can cancel setting the
Owner Password at this time by pressing (M). If you want
to continue and set your Owner Password continue as
described next.
Follow these steps to continue to program the
owner password.
Step 2 - Enter the 5 numbers you want for the
owner password
6) The display should be [New OPW <0
repeat steps 1 through 5 above.
7) Enter the 5-digit number password you desire
using the method described in step 4 above.
a. Press . The 0 will change to a 1.
b. Press numerous times. The 1 will
continue to increment. When the number
gets to 0 stop pressing the key.
c. Press to advance to the next digit. 00
will be displayed.
d. Press three more times. A 0 will be
added to the display each time
pressed.
e. When five 0s are displayed press
The display will prompt [New OPW <0 >]
(figure 38). (OPW is the abbreviation for
Owner Password).
24
is
.
>]. If not,