Setting The Owner Password - Cuddeback EXPERT Owner's Manual

Programming the Passwords
To prevent accidentally programming a password
Cuddeback requires three steps to be completed
before the password is programmed.
1) Enter the current owner password (the default as
shipped is 00000).
2) Enter a new password.
3) Repeat the new password.
When the 3 steps are successfully completed
[Saved!] will be displayed and the new password
will be programmed into Cuddeback.

SETTING THE OWNER PASSWORD

To change the owner password you must first enter
the current owner password of 00000.
Step 1 - Enter the owner password to enable
changing the owner password.
1) Press numerous times until [Theft Stop? C =
Yes] appears on the LCD.
2) Press . The display will prompt [Owner PW
Change?] (figure
3) Press . The display will prompt [Owner PW
<0 >].
37).
TIP - You can program the pass-
words, name, and phone num-
bers as many times as you wish.
If you make an error you can
reprogram them.
23
Owner PW
Change?
Figure 37