Setting The Lock Password - Cuddeback EXPERT Owner's Manual

8) After all 5 numbers are display press
display will prompt [RepeatPW <0
Step 3 - Repeat the 5 numbers for the owner password
9) Enter the 5-digit number again then press
10) If both sequences of numbers are identical the
display will prompt [Saved!]. If the saved mes-
sage does not appear then the password was not
programmed and you will have to repeat the
entire process.
11) Press to continue to set the Lock Password.

SETTING THE LOCK PASSWORD

The method to set the lock password is similar to
setting the owner password. To change the lock
password you must first enter the owner password.
The default owner password is 00000. If you
changed the owner password you will need to enter
that password instead.
Step 1 - Enter the owner password to enable
changing the lock password
1) If you have just programmed the Owner
Password, the Lock Password will be displayed.
If not, follow steps 2 and 3.
2) Press numerous times until [Theft Stop? C =
Yes] appears on the LCD.
. The
>] (figure 39).
.
25
Repeat PW
<0 >
TIP - You can cancel setting the
password at any point before
Saved! is displayed by pressing (S).
TIP - For the best security you
should use different numbers for
the owner and lock passwords.
Figure 39