Cuddeback EXPERT Owner's Manual page 26

Lock PW
Change?
New LPW
<0
Repeat PW
<0
Saved!
TIP - You can cancel setting the
password at any point before
Saved! is displayed by pressing (S).
To disable password protection
program the Lock and Owner pass-
word with 00000 (five zeros).
3) Press
Change?].
4) Press
PW Change?]
5) Press
Figure 40
<0 >].
6) Enter the owner password using the method pre-
viously described. After all 5 numbers are entered
press
>
password you need to enter the default owner
password 00000.
Figure 41
Step 2 - Enter the 5 numbers you want for the lock
password
7) The display should be [New LPW <0
>
41). (LPW is the abbreviation for Lock Password).
8) Enter the 5-digit number password you desire
using the method previously described.
Figure 42
9) After all 5 numbers are entered press
display will prompt [RepeatPW <0
(figure
Step 3 - Repeat the 5 numbers for the lock
password
Figure 43
10) Enter the 5-digit number again then press
11) If both sequences of numbers are identical the
display will prompt [Saved!]
saved message does not appear then the pass-
word was not programmed and you will have to
repeat the process.
12) Press
. The display will prompt [Owner PW
again. The display will prompt [Lock
(figure 40).
. The display will prompt [Owner PW
. If you did not program the owner
42).
to continue to set the User Name.
26
>] (figure
. The
>]
.
(figure 43). If the