Table of Contents
Advertisement
3. Use a screwdriver to remove the two metal knockouts.
4. Insert the rope clip through the rear panel; then, attach and tighten the nuts.
5. Thread the cable through the rope clip and around an object that is not part of
6. If you have other options to install or remove, do so now; otherwise, go to
Replacing the bezel
Complete the following steps to replace the bezel:
1. Insert the two tabs on the bottom of the bezel into the matching holes on the
2. Push the top of the bezel toward the computer until the two tabs at the top of
38
IntelliStation A Pro Type 6224: Installation Guide
or permanently secured to the building structure or foundation, and from which
the cable cannot be removed. Fasten the cable ends together with a lock. After
you add the security cable, be certain it does not interfere with other cables that
are connected to the computer.
Rope clip
"Completing the installation" on page 39.
computer chassis.
the bezel snap into place.
Advertisement
Table of Contents
