Set Mode - Icom IC-M33 Instruction Manual

7

SET MODE

D Power save function
The power save function reduces current drain by deactivat-
ing the receiver circuit for preset intervals.
• ON : The power save function is turned ON. The power save func-
tion will activate when no signal is received, and no opera-
tion is performed for 5 sec.
• OFF : The power save function is turned OFF.
Power save ON
(default)
D Squelch sensitivity
When this function is turned ON, rejection of noise is im-
proved so that the squelch is not easily affected by noise.
Squelch sensitivity
OFF (default)
20
"PS"
Push
Power save OFF
"SS"
Push
Squelch sensitivity
ON
D Low fix function
(Appears only when the optional battery case is attached. Not avail-
able with German version.)
When this function is turned ON, the output power is fixed to
low except for channel 16.
Push
Low fix function
OFF (default)
"LF"
Low fix function ON