Dualwatch/Tri-Watch (Except Holland Version); I Description; I Operation - Icom IC-M33 Instruction Manual

6
DUALWATCH/TRI-WATCH

I Description

Dualwatch monitors Channel 16 while you are receiving
on another channel; Tri-watch monitors Channel 16 and the
call channel while receiving another channel. Dualwatch/Tri-
watch is convenient for monitoring Channel 16 when you are
operating on another channel.
DUALWATCH/TRI-WATCH SIMULATION
Dualwatch
• If a signal is received on Channel 16, dualwatch/tri-watch
pauses on Channel 16 until the signal disappears.
• If a signal is received on the call channel during Tri-watch,
Tri-watch becomes Dualwatch until the signal disappears.
• To transmit on the selected channel during Dualwatch/Tri-
watch, push and hold [PTT].
16
Call channel
Tri-watch
(Except Holland version)

I Operation

q Select Dualwatch or Tri-watch in set mode. (p. 19)
w Select the desired channel.
e Push and hold [DUAL] (SCAN) for 1 sec. to start Dual-
watch or Tri-watch (depending on set mode setting).
• "DUAL" blinks during dualwatch; "TRI" blinks during tri-watch.
• A beep tone sounds when a signal is received on Channel 16.
• Tri-watch becomes dualwatch when receiving a signal on the call
channel.
r To cancel dualwatch/tri-watch, push [SCAN] again.
[Example]: Operating Tri-watch on INT channel 07.
Tri-watch starts.
Tri-watch resumes after
the signal disappears.
Signal is received on call
channel.
Signal received on Channel
16 takes priority.