Set Mode; I Set Mode Programming - Icom IC-M33 Instruction Manual

I Set mode programming

Set mode is used to change the settings for 11 transceiver
functions: beep tone function, priority scan function, scan re-
sume timer, auto scan function, dual/tri-watch function, moni-
tor key action, automatic backlighting, LCD contrast setting,
power save function, squelch sensitivity and low fix function*.
*Appears only when the optional battery case is attached; Not avail-
able with German version.
D SET MODE ITEMS
• Low fix*
• Squelch sensitivity
• Power save
(The display shows the current settings, and the selected function is displayed in the dotted circle.)
• Beep tone
Starting item
: Push or
+ [Z]
: Push
• Automatic
backlighting
• LCD contrast

SET MODE

D Set mode operation
q Turn power OFF.
w While pushing [SQL], turn power ON to enter set mode.
• "bP" appears.
e Push [SQL] or [Y Y ]/[Z Z ] while pushing and holding [SQL]
to select the desired item, if necessary.
r Push [Y Y ]/[Z Z ] to select the desired setting of the item.
t To exit set mode, push [16].
†
• Priority scan
*Appears only when the optional
+ [Y]
battery case is attached; Not
available with German version.
†
Not available with Holland version.
• Monitor key action
7
6
7
†
• Scan resume timer
†
• Auto scan
†
• Dual/Tri-watch
17