The control panel and programme table
- All figures are nominal and vary for example due to temperature variations on the inlet water.
- The figures apply to washing up 5 place settings according to test standard EN 50242.
Programme selector/On/off switch
To start the machine turn the selector knob to the
programme start. The ON/OFF switch is built into
the programme selector. To isolate the dishwasher
from the mains completely, unplug it from the wall
During the water heating process, the timer is
The lamp indicates that the wash cycle is on and
goes out when the machine has completed the cycle.
55° - Button in
65° - Button out
Press the handle down and open the door. Avoid opening
the door while the machine is running.
If the door is opened and is put standing ajar after
a completed programme the dishes will dry faster.
Rinse with heat
- 5 -