Description of the appliance
Rinse conditioner dispenser 1
Use of a rinse conditioner will result in cleaner and faster
drying of the load, since it helps water to run off. Too
much conditioner may result in streakiness, too little may
cause white spots. The dispenser holds about 140 ml. This
is enough for 40-70 wash cycles, depending on the dosa-
ge setting. When the rinse conditioner level is approa-
ching the bottom of the scale it is time to refill the dispenser.
Adjust the dosage setting according to the hard-
ness if the water. Begin with the lowest dosage
setting and increase as necessary by turning the
1. Swivel out the filler trough.
2. Fill up with rinse conditioner until the level reaches
up to the red mark on the level indicator tube; do
3. Wipe off any spillage carefully to prevent excessive
foaming during the next wash programme.
4. Close the filler trough afterwards.
Do not fill the rinse aid dispenser with liquid
Spray arm 2
It is important to keep all the holes in the spray arm clear.
A clogged hole can seriously affect washing efficiency. If
the spray arm needs cleaning, unscrew the nut clockwise,
remove the washer and lift off the spray arm. Clear the
holes and shake out any food remnants.
Coarse filter 3
The purpose of the coarse filter is to catch large objects
such as toothpicks and pieces of eggshell. Make sure that
the filter is always clean. Lift it out and rinse it under run-
ning water whenever necessary.
Fine filter 4
It is just as important to keep this filter clean. A dirty or
clogged filter will always impair washing efficiency. The
fine filter can easily be lifted out for cleaning when you
have removed the coarse filter.
Detergent dispenser 5
Pour the detergent into the compartment, for a normal load
about 1-2 tablespoons.
Only use detergents specially designed for
- 4 -