Setting Water Hardness; Programming Coffee; Programming Cappuccino; Programming The Jug - Electrolux ESP4SL60CN Instructions Manual

splays the message "START TIME" (AUTO
START-UP). Press the OK (B9) icon. "CON-
FIRM" will appear on the display. Press "ESC"
to deactivate and the
sappear.
Changing coffee temperature
To change coffee temperature, proceed as fol-
lows:
• Press the icon (B2) to enter the menu
and then the
"TEMPERATURE" is displayed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8) to se-
lect the required coffee temperature from
low, medium and high.
• Press the OK button (B9) to confirm the tem-
perature selected.
• Press the ESC icon (B6) to exit the menu.

Setting water hardness

The operating period can be extended if required,
making descaling less frequent by programming
the machine on the basis of the real lime content
in the water used.
Proceed as follows:
• Remove the "Total Hardness Test" strip (atta-
ched to page 2) from its packaging then dip
it fully in the water for a few seconds,
Then remove and wait about 30 seconds
(until it changes colour and forms red squa-
res).
• Turn the appliance on by pressing the On-
Off/stand-by button (A7).
• Press the icon (B2) to enter the menu
and then the
"WATER HARDNESS" is displayed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8) until
the number coincides with the number of red
squares on the test strip (for example, if there
are 3 red squares on the test strip, select the
message "WATER HARDNESS 3" .
• Press the OK icon (B9) to confirm.
The coffee maker is now programmed to pro-
vide the descale warning when actually ne-
cessary.
symbol will di-
icons (B7) and (B8) until
icons (B7) and (B8) until

Programming coffee

For instructions on programming coffee, see the
"CHANGING THE QUANTITY OF COFFEE IN THE
CUP" section.

Programming cappuccino

For instructions on programming cappuccino,
see the "CHANGING THE QUANTITY OF MILK
AND COFFEE FOR CAPPUCCINO" section.
Programming the jug (if provided)
For instructions on programming the jug, see the
section " CHANGING JUG FUNCTION PARAME-
TERS".

Programming water

For instructions, see the "CHANGING THE QUAN-
TITY OF HOT WATER" section.

Descaling

Important! Descaler contains acids. Re-
spect the safety warnings provided by the manu-
facturer and given on the descaler pack.
N.B.! Use the descaler recommended by
the manufacturer only. Use of other descalers in-
validates the guarantee. Failure to descale the ap-
pliance as described also invalidates the
guarantee.
Important! Before descaling, make sure
the water softener filter has been removed.
When "PLEASE DESCALE !" is displayed, the ma-
chine requires descaling.
Proceed as follows:
• Make sure the machine is ready;
• Attach the hot water spout (C7) to the nozzle
(A10).
• Press the
and then the
"DESCALE" is displayed.
• Press the OK icon (B9) and the appliance di-
splays "DESCALE PLEASE CONFIRM".
• Press the OK icon (B9). The message "ADD
DESCALER PLEASE CONFIRM" is displayed.
• Empty the tank of water, pour the contents of
23
GB
icon (B2) to enter the menu
icons (B7) and (B8) until