Table of Contents
Advertisement
Press the
icon (B2) to enter the menu and then the
icons (B7) and (B8) until "START TIME" is displayed.
•
Press the OK icon (B9).
•
Use the
icons (B7) and (B8) to set the auto-start
time, then press the OK icon (B9) to confirm.
•
Use the
icons (B7) and (B8) to set the minutes, then
press the OK icon (B9) to confirm.
•
Press the
icons (B7) and (B8) to activate the au-
to-start function until "AUTO START" is displayed.
•
"AUTO START PLEASE CONFIRM" is displayed. PRESS THE OK
ICON (B9). The
symbol appears on the display.
•
Press the ESC (B6) icon (B6) to exit the menu.
•
To disable auto-start, press the
icons (B7) and (B8) until "AUTO START" is displayed.
Press the OK icon (B9).
"PLEASE CONFIRM" is displayed
Press (B6) to disable, the ESC symbol disappears
Changing coffee temperature
To change coffee temperature, proceed as follows:
•
Press the
icon (B2) to enter the menu and then the
icons (B7) and (B8) until "TEMPERATURE" is dis-
played.
•
Press the OK icon (B9).
•
Press the
icons (B7) and (B8) to select the required
coffee temperature from low, medium and high.
•
Press the OK button (B9) to confirm the temperature select-
ed.
•
Press the ESC icon (B6) to exit the menu.
Setting water hardness
The operating period can be extended if required, making desca-
ling less frequent by programming the machine on the basis of
the real lime content in the water used.
Proceed as follows:
•
remove the "Total Hardness Test" strip from its packaging
then dip it fully in the water for a few seconds,
Then remove and wait about 30 seconds (until it changes
colour and forms red squares).
•
turn the appliance on by pressing the ON/OFF/stand-by
button (A7).
•
Press the
icon (B2) to enter the menu and then the
icons (B7) and (B8) until "WATER HARDNESS" is dis-
played.
•
Press the OK icon (B9).
•
Press the
icons (B7) and (B8) until the number co-
incides with the number of red squares on the test strip (for
example, if there are 3 red squares on the test strip, select
the message "WATER HARDNESS 3"
•
Press the OK icon (B9) to confirm.
The coffee maker is now programmed to provide the des-
cale warning when actually necessary.
Programming coffee
For instructions on programming coffee, see the "CHANGING THE
QUANTITY OF COFFEE IN THE CUP" section.
Programming cappuccino
For instructions on programming cappuccino, see the section
icon (B2), then the
"CHANGING THE QUANTITY OF MILK AND COFFEE FOR CAPPUC-
CINO".
Programming the jug (if provided)
.
For instructions on programming the jug, see the section "
CHANGING JUG FUNCTION PARAMETERS".
Programming water
For instructions, see the "CHANGING THE QUANTITY OF HOT WA-
TER" section.
Descaling
Respect the safety warnings provided by the manufacturer and
given on the descaler pack.
turer only.
Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also invalidates the
guarantee.
When "PLEASE DESCALE !" is displayed, the machine requires
descaling.
Proceed as follows:
•
make sure the machine is ready;
•
Press the
•
Press the OK icon (B9).
The message "ADD DESCALER PLEASE CONFIRM" is dis-
played.
•
Empty the tank of water, pour the contents of the descaler
15
Important! Descaler contains acids.
N.B.: Use the descaler recommended by the manufac-
icon (B2) to enter the menu and then the
icons (B7) and (B8) until "DESCALE" is displayed.
EN
Advertisement
Table of Contents
Troubleshooting
