The Oven Light; Storage Drawer - Electrolux EKC60110 User Manual

The oven light

NOTE! Before you change the bulb,
turn all the knobs to zero and make
sure that the cooker is disconnected
from the power supply. For cookers
fitted with a cable and plug, pull out
the plug. For other cookers, switch
off the power with the multi-pole
switch.
Place a cloth on the bottom of the oven to
protect both the light and the glass.
CHANGING THE OVEN LIGHT
THE PROTECTIVE GLASS
1 Check that the oven is not hot.
2 Unscrew the protective glass by
turning it to the left and clean it.
(
SEE ILLUSTRATION
3 If necessary:
Replace the oven light with a new
bulb marked 230–240V, 40W, 300°C,
with an E14 base.
4 Re-fit the protective glass.

Storage drawer

NOTE!
cleaning agents in the storage
compartment. Never stand on the
storage compartment or its handle.
1 Empty the compartment and pull it
out to the "stop".
2 Hold the handle, lift it upwards and
the compartment goes free from the
catch at the rear edge.
3 Pull the compartment completely out.
After cleaning, place the compartment
rollers on the brackets (
Push in the compartment. Lift it up slightly
to start with so that the rollers do not stick in
the front catch.
/
CLEANING
).
Do not keep chemicals or
SEE ILLUSTRATION
).
32