Acomdata External HARD DRIVE USB 2.0 User Manual page 93

the device. Unplug and plug in the USB cable connected
to the Drive. The Drive should now mount properly and
Nomad should launch.
When I leave my computer idle for a while and come
back, the Drive won't work properly.
A: The most likely cause is that your computer is going
into Sleep mode. The immediate solution is to restart your
computer. To prevent this problem from re-occurring, go
into your Power Settings/Energy Saver and set it to where it
never goes into Sleep mode.
The Drive feels quite warm when powered on.
Is this dangerous?
A: When in operation, the Drive may feel quire warm to the
touch. This is normal.
The Drive gives me a "Device cannot start. Code (10)."
A: This is a power issue. Make sure your connections are
secure. The other possibility is that the Drive has malfunc-
tioned and requires service.