Connecting The Drive To Your Computer - Acomdata External HARD DRIVE USB 2.0 User Manual

Connecting the Drive to Your Computer

Refer to the illustration on the next page when following
the instructions below.
1. Plug the AC adapter into the Drive's Power Port.
The connector can be inserted only one way. Do
not force it. If the connector will not go in, check
the orientation and try again.
Do not force the connector or you may damage it and/or
the Drive and void the warranty.
2. Plug the power cord into the socket in the AC adapter.
Then plug the other end into an AC outlet.
If the power cord has three prongs, be sure to plug the cord
into a three-prong (grounded) outlet.
3. Plug the Type A connector of the USB
cable into a USB port on your computer
or USB hub.
4. Plug the Type B connector into the USB
2.0 port on the back of the Drive.
When making the connections, be sure to
correctly insert the connectors, or you may
damage the Drive and void the warranty.
7
"A" "B"