Enabling Password Security - Acomdata External HARD DRIVE USB 2.0 User Manual

. You will see a message telling you to unplug and plug in the
device. Click OK, then unplug and plug in the USB cable con-
nected to the Drive.
. After you re-connect the Drive, both the CD partition and
the HD partition will mount automatically. You can confirm
this by going to My Computer where you should see the CD
PART and HD PART icons.
Enabling Password Security
You can enable Password Security at any time. Doing so will
not affect any data stored on your Drive.
1. Make sure the Drive is connected to your computer and pow-
ered on.
. There are a number of ways to access the window that lets
you enable Password Security. Select an option below and
then proceed to step .
From the Nomad Mobile Desktop:
Click 'Password Security' .
If Nomad was not activated:
Double-click the CD PART icon in My Computer. In the CD
PART icon window, double-click PWMangr.exe.
7