Technical Specifications; Installing The Drive; Connecting The Drive To Your Computer - Acomdata Ondago User Manual

Technical Specifications

Model #: .................................................................... SHDxxxUFAPE-54
Dimensions:
(inches) .............................................................3.25" x 5.28" x 0.80"
(mm) ...................................................................82.6 x 134.1 x 20.3
Interface(s):
................................................................................ Hi-Speed USB 2.0
.................................................................FireWire 400 (IEEE 1394a)
Chassis (approved/recognized) .................................... FCC/CE/UL
Interface transfer rate (max)
USB 2.0 ................................................................................ 480 Mbps
FireWire 400 ...................................................................... 400 Mbps
Data buffer ........................................................................................ 2 MB
Rotational speed .................................................................. 5400 RPM
Latency (average) ........................................................................ 4.2 ms
Seek time (read typical) ..........................................................12.0 ms
Track to track seek time (average) ........................................ 2.0 ms
Error rate (nonrecoverable) ............................................. 1 in 10E13
Power Requirement .........................................................1.0 A, 5 VDC
Ambient temperature ........................ 5ºC – 40ºC (41° F to 104° F)
– 20 –
I
NSTALLING THE
Please read ALL sections carefully before using the Drive.
Once you have completed the hardware installation, your
Drive will be ready to use as a general-purpose data storage
device. If you wish to use PushButton™ Backup, once you
complete this section, read the PushButton™ Backup User's
Guide.
This section contains detailed instructions for:
• Connecting the Drive to your computer and mounting it
to your operating system;
• Naming the Drive;
• Re-formatting the Drive for optimum performance.
Connecting the Drive
to Your Computer
The AcomData Ondago Drive can be connected to a laptop
or desktop computer, and it can run off of power supplied
directly by your computer (bus-powered operation), or via AC
power, using the optional AC adapter.
We have included a variety of data cables so that whether
you are using a Mac or PC, a laptop or a desktop, just about
all users will be able to use bus-powered operation.
See below for connection options and instructions.
– 21 –
D
RIVE