Acomdata DRIVEPOD Quick Start Installation Manual page 32

30
Adding a 5th DrivePod to a Stack
1. Place the 5th drive onto the 4th drive,
following the correct procedure described
on page 27.
2. Connect the supplied AC adapter to
the Power Port on the DrivePod.
3. Connect the power cord to the AC
adapter.
4. Plug the power cord into a standard
outlet. Make sure all connections are
secure.
5. Press the Power Button.
Removing DrivePods from a Stack
Important Notes:
• Before you turn off or remove any drive from a stack, regardless if it has
an AC adapter or not, you must dismount the drive first. If a drive is
turned off or removed without first being dismounted, data stored on the
drive may be lost or damaged.
• If the drive you want to remove has an AC adapter connected to it, you
FIGURE 12