Acomdata DRIVEPOD Quick Start Installation Manual page 15

13
should see a new icon and drive
letter for the DrivePod. (If you are
not sure which icon represents
the DrivePod, turn off the drive
and see which icon disappears.
Then turn the drive back on and
wait for the icon to reappear.)
8. Right-click on the DrivePod icon
and select Format. The Format
window will appear. In the Format
window, verify the drive's capacity.
It should be close to the stated
FIGURE 3
capacity of your DrivePod, specified
in Megabytes. (The capacity figure
shown in Figure 4 is just an exam-
ple and may not reflect the capaci-
ty of your DrivePod)
9. Under Format type select Full;
everything else should be left at
the default setting. In the Label
field under Other options you may
assign a name to the DrivePod.
The name you assign is limited to
eight characters and no symbols
FIGURE 4