Connector Cap - Acomdata DRIVEPOD Quick Start Installation Manual

32
appeared from the Desktop, the drive has been dismounted. You many then
unplug the USB cable, and the AC adapter and power cord.
Using the Connector Cap
Whether you have one DrivePod or a stack of DrivePods, one drive will always
have an exposed connector. While it is perfectly safe to leave the connector
exposed, you may wish to cover it with the supplied Connector Cap to protect
the connector and block out dust.
To cover the connector, simply place the Connector Cap on the connector so
that the embossed AcomData logo is right-side-up when looking at the drive
from the front. If you place the Connector Cap with the logo up-side-down, it
will not seat properly.