Installation - Electrolux EKC54503O User Manual

Table of Contents

Advertisement

The residual heat indica-
tor does not come on
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. INSTALLATION

WARNING!
Refer to the Safety chapters.
14.1 Location of the appliance
You can install your freestanding appli-
ance with cabinets on one or two sides
and in the corner.
Minimum distances
Dimen-
sion
A
B
14.2 Technical Data
Height
Problem
B
A
mm
2
685
Dimensions
858 mm
Possible cause
The cooking zone is not
hot because it operated
only for a short time.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity.
Width
Depth
Total electricity
power
Voltage
Frequency
14.3 Levelling
Use small feet on the bottom of appliance
to set the appliance top surface level with
other surfaces.
A
Remedy
If the cooking zone must
be hot, speak to the
Service Centre.
.........................................
.........................................
.........................................
Dimensions
ENGLISH
23
500 mm
600 mm
7935 W
230 V
50 Hz

Advertisement

Table of Contents
loading

Table of Contents