Table of Contents
Advertisement
Configuration
(DMX)
DMX Personality
and Starting
Address
Page 12 of 20
Set the product in DMX mode to control with a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Wedge™ Tri uses up to 8 DMX channels in its 8-channel DMX mode, which defines
the highest configurable address to 505.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the DMX personality and starting address, do the following:
1.
Press <MENU> repeatedly until 3-CH (3-channel mode) or 8-CH (8-channel mode)
shows on the display.
2.
Press <ENTER> and d 1—d512 shows on the display.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Wedge™ Tri User Manual
Advertisement
Table of Contents
