User Settings Window - Cisco 4300 User Manual

Administration Windows

User Settings Window

The User Settings window lets you configure the following types of IP camera users:
•
•
There is always at least one user with Administrator privileges configured. The user name of this user is
"admin." You can configure up to four additional users and assign privilege levels to each one.
When you configure users, follow these guidelines:
•
•
•
•
To display the User Settings window, access the configuration windows as described in the
the Initial Setup of the IP Camera" section on page
Table 3-18
Table 3-18
Option
User List Area
User Name
Password
Confirm Password
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
3-28
Administrator—Can access all IP camera windows, features, and functions.
Viewer—Can access only the Camera Video/Control window and all features in that window except:
Video image controls
–
Set Current Preset as Home button
–
Add Preset Position button
–
Deleted Selected Preset button
–
Pan/tilt speed controls
–
Motion detection controls
–
After you enter a name, password, and privilege level for a user, click Add next to the user
information to save your changes.
To change the password for an existing user, click Change next to the user name.
To remove a user, click Delete next to the user. If you delete a user who is logged into the IP camera,
the user remains logged in and can continue access the IP camera.
To change the name of a user, you must delete the user then create a new user.
describes the options in the User Settings window.
User Settings Window Options
Description
Enter a unique name for the user.
The user name is case sensitive and can include up to 64 letters, numbers,
and special characters, but no spaces. Special characters are: ! % ( ) + , - =
@ _ ~
There is always one user named admin (all lower case), which cannot be
deleted.
Enter a password for the user.
The password is case sensitive and must contain from 8 to 32 characters,
which can be letters, numbers, and special characters, but no spaces. Special
characters are: ! $ ( ) - . @ ^ _ ` { } ~
Re-enter the password for the user.
Chapter 3 Configuring and Managing the IP Camera
2-5, click Administration, then click Users.
"Performing
OL-19609-04