Firmware Settings Window; Device Processes Window - Cisco 4300 User Manual

Administration Windows
Table 3-20
Option
Firmware Maintenance Area
Firmware Version
Firmware Released
Date
Details button
Firmware Upgrade
Upgrade button

Device Processes Window

The Device Processes window displays the processes that occupy TCP or UDP ports, and lets you stop
any of these processes.
Take care when stopping processes because some processes are required for the camera to operate
properly. Processes that you stop in this window can restart the next time that you log in to the IP camera.
If you delete a required process and the camera stops functioning, exit your web browser and then log
back in to the IP camera to restart the process. If the process does not restart, power the IP camera off
and then back on.
To display the Device Processes window, access the configuration windows as described in the
"Performing the Initial Setup of the IP Camera" section on page
Device Processes.
To stop any process, click the Delete button that appears to the right of the process in the window.
Table 3-21
Table 3-21
Option
Protocol
Local Address
Foreign Address
State
Program Name
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
3-32
Firmware Settings Window Options (continued)
Description
Version of the firmware that is installed on the IP camera.
Release date of the current firmware.
Click this button to display a pop-up window with additional information
about the firmware on the IP camera.
To upgrade the firmware on the IP camera, begin by entering the path and
folder where new firmware file for the IP camera is stored. The upgrade file
may be stored on another PC. You can click Browse to find this location.
After entering the path and folder for the firmware file, click this button to
load the firmware upgrade on the IP camera.
Do not power down the IP camera during the upgrade procedure.
describes the options in the Product Process window. All options are for display only.
Device Process Window Options
Description
Port (tcp or udp) that the process occupies
IP address of the device that the process is listening to
IP address and port number of the client device that is connected for the
process
State of the process
Name of the process
Chapter 3 Configuring and Managing the IP Camera
2-5, click Administration, then click
OL-19609-04