Ip Filter Settings Window - Cisco 4300 User Manual

Network Setup Windows
Table 3-14
Option
Root CA Certificate
EAP-PEAP Configuration Options
Note
Inner EAP Protocol
User Name
Password
Anonymous ID
Validate Server
Certificate
Root Certificate
Root CA Certificate
EAP-FAST Configuration Options
Note
Inner EAP Protocol
User Name
Password
Anonymous ID
Allow Automatic PAC
Provisioning
PAC file

IP Filter Settings Window

The IP Filter Settings window provides options for controlling access to the IP camera by designating
up to 10 IP addresses or address ranges that are allowed or denied access to the IP camera.
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
3-24
802.1x Settings Window Options (continued)
Description
Path and folder where the root certificate that is required for 802.1x
authentication is stored. You can click Browse to find this location.
After you enter this information, click Upload to upload the certificate to the
IP camera.
These options appear if you select the protocol type EAP-PEAP.
Choose an inner authentication method for EAP-PEAP.
Enter the user name that the IP camera uses to access the RADIUS server.
Enter the password that the IP camera uses to access the RADIUS server.
Optional. Anonymous identifier to be used instead of a user name for
logging in to the RADIUS server.
Check this check box if you want the identity of the RADIUS server to be
validated.
Path and folder where the root certificate that is required for 802.1x
authentication is stored. You can click Browse to find this location.
After you enter this information, click Upload to upload the certificate to the
IP camera.
Path and folder where the root certificate that is required for 802.1x
authentication is stored. You can click Browse to find this location.
After you enter this information, click Upload to upload the certificate to the
IP camera.
These options appear if you select the protocol type EAP-FAST.
Choose an inner authentication method for EAP-FAST.
Enter the user name that the IP camera uses to access the RADIUS server.
Enter the password that the IP camera uses to access the RADIUS server.
Optional. Anonymous identifier to be used instead of a user name for
logging in to the RADIUS server.
Check this check box if you want to allow authentication servers to establish
a secure connection with the IP camera so that they can provide the IP
camera with new Protected Access Credentials (PACs).
Path and folder where the PAC file is stored. You can click Browse to find
this location.
After you enter this information, click Upload to upload the certificate to the
IP camera.
Chapter 3 Configuring and Managing the IP Camera
OL-19609-04