Discovery Settings Window - Cisco 4300 User Manual

Video surveillance high-definition ip cameras
Table of Contents

Advertisement

Network Setup Windows
Table 3-11
Option
NTP Server Settings Area
Note
Primary NTP Server
Primary NTP Server
Port
Secondary NTP Server
Secondary NTP Server
Port

Discovery Settings Window

The Discovery Settings window provides options for configuring the IP camera to work with Cisco
Discovery Protocol or Bonjour. These applications facilitate monitoring and management of your
network.
To display the Discovery window, access the configuration windows as described in the
Initial Setup of the IP Camera" section on page
If you change any options in this window, you must click the Save Settings button to save the changes.
If you do not click this button, changes are not retained when you exit the window. Save Settings
appears at the bottom of the window. You may need to scroll down to it.
Table 3-12
Table 3-12
Option
Cisco Discovery Protocol (CDP) Area
Enable CDP
Show Neighbors button Displays a new window with information about CDP-enabled device
Bonjour Area
Enable Bonjour
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
3-20
Time Settings Window Options (continued)
Description
These options do not apply if you choose the Manually Configure Time option.
If you configured the IP camera to obtain its time from an NTP server,
identify the primary NTP server by choosing IP Address or Hostname from
the drop-down list and entering the IP address or host name in the
corresponding field.
If you configured the IP camera to obtain its time from an NTP server, enter
the primary NTP server port number.
Valid values are 123 and 1024 through 65535. The default port is 123.
If you configured the IP camera to obtain its time from an NTP server,
identify the secondary NTP server by choosing IP Address or Hostname
from the drop-down list and entering the IP address or host name in the
corresponding field.
If you configured the IP camera to obtain its time from an NTP server, enter
the optional secondary NTP server port number.
Valid values are 123 and 1024 through 65535. The default port is 123.
describes the options in the Discovery Settings window.
Discovery Settings Window Options
Description
Check this check box if CDP is enabled in your network and you want the
IP camera to broadcast CDP discovery messages.
neighbors in your network.
Check this check box if Bonjour is enabled in your network and you want the
IP camera to broadcast Bonjour discovery messages.
Chapter 3
Configuring and Managing the IP Camera
2-5, click Network Setup, then click Discovery.
"Performing the
OL-19609-04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4500

Table of Contents