Cisco 4300 User Manual page 69

Chapter 4 Viewing Live Video
Table 4-1
Control
Presets controls
Preset drop-down list
Set Current Preset as
Home button
Start Auto-Patrol
toggle button
Stop Auto-Patrol
toggle button
Add Preset Position
button
Delete Selected
Preset button
Pan/tilt controls
IP camera control
buttons
OL-19609-04
Camera Video/Control Window Controls (continued)
Description
Displays a list of preset positions that you have set for the IP camera. When
you choose a preset position from this list, the IP camera moves to that
position.
Click this button to define the current IP pan and tilt camera position as its
home position.
Click the Start Auto-Patrol button to start the patrol sequence. The button
changes to the Stop Auto-Patrol button. Click the Stop Auto-Patrol button to
stop a sequence that is executing. The button changes to the Start Auto-Patrol
button.
You define a patrol sequence as described in the
section on page 3-14.
Click this button to add the current IP camera position as a preset position.
In the pop-up box, enter a unique name for this position and click Save. The
name can contain from 1 to 64characters, which can be letters, numbers, and
special characters, but no spaces. Special characters are: ! % ( ) , - = @ _ ~
You can create up to 8 preset positions.
Click this button then click OK in the confirmation dialog box to delete the
preset position that appears in the Preset drop-down list.
To pan the IP camera, use the left or right arrow buttons.
To tilt the IP camera, use the up or down arrow buttons.
To move the IP camera to its home position, click the Go to Home Position
button, which is located in the middle of the group of arrow keys.
Pan and tilt functions require that the IP camera be installed with a pan/tilt
mount that supports the Pelco D protocol and that pan and tilt functions are
enabled. For more information, see the
page 3-9.
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
"Patrol Sequence Window"
"Pan Tilt Settings Window" section on
4-5