Understanding The Ip Camera User Interface; Ip Camera Windows - Cisco 4300 User Manual

Understanding the IP Camera User Interface

Table 2-2
Link
Refresh
Home
View Video
Setup
Logout
About
Help

IP Camera Windows

The IP camera user interface includes these main windows:
•
Table 2-3
Field
General Information
ID
Name
Current Time
S/N
Firmware
Codec
Part Number
Top Assembly Revision Cisco assembly revision number.
Network Status
MAC Address
Cisco Video Surveillance 4300 and 4500 High-Definition IP Cameras User Guide
2-8
Links in the IP Camera Windows
Description
Updates the information in the window that is currently displayed. Administrator
Displays the Home window.
Displays the Camera Video/Control window.
You may be prompted to install ActiveX controls when trying to
access this window for the first time. ActiveX controls are required
to view video from the IP camera. Follow the on-screen prompts to
install ActiveX controls.
Provides access to the configuration menus for the IP camera.
Logs you out from the IP camera.
Displays a pop-up window with model, version, and copyright
information for the IP camera.
Displays reference information for the window that is currently
displayed.
Home window—Displays the information that is described in
Home Window Information
Description
Identifier of the IP camera. To configure the ID, see the
Window" section on page
Name of the IP camera. To configure the name, see the
Window" section on page
Current date and time of the IP camera. To set the date and time, see the
"Time Settings Window" section on page 3-18
Serial number of the IP camera.
Version of the firmware that is installed on the IP camera.
Version of the codec that is running on the IP camera.
Cisco manufacturing part number of the IP camera.
MAC address of the IP camera.
Table 2-3.
3-16.
3-16.
Chapter 2 Getting Started
Privilege Level
User
Administrator
Administrator
User
Administrator
Administrator
User
Administrator
User
Administrator
User
"Basic Settings
"Basic Settings
OL-19609-04