Advertisement
2x1 DVI DL OPERATION NOTES
Operation Notes
When turning on or rebooting your computers, the DVI DL Switcher must be select-
ed to the computer that is booting until the computer completes the boot cycle. This
step can be eliminated using the Gefen DVI Detective, which stores the displays
EDID.
If you loose your picture when switch from source 1 to source 2 or vice-versa you
will need a DVI Detective.
If you are experiencing USB dropouts try using the switcher just as a USB hub by
only connecting the USB cables from your computers to the switcher. Connect your
devices to the USB out portion of the switcher and connect your display to your
computer directly. Start your computer up and try switching. If your USB devices do
come up normally then you will need a DVI Detective to negotiate the video/USB
signals for faster switching. If they do not come up normally, then you will need to
call tech support.
5
Advertisement
