Advertisement
Quick Links
Advertisement
Related Manuals for Gefen DIGAUD-241
Summary of Contents for Gefen DIGAUD-241
- Page 1 2x1 Digital Audio Switcher U S E R M A N U A L www.gefen.com...
- Page 2 Chatsworth, CA 91311 www.gefen.com support@gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 2x1 Digital Audio Switcher is a trademark of Gefen Inc.
-
Page 3: Table Of Contents
Introduction Features Panel Descriptions Connecting and Operating the 2x1 Digital Audio Switcher RMT2-IR Installation IR Extender Installation Specifi cations Warranty TABLE OF CONTENTS... -
Page 4: Introduction
Our Commitment Gefen will always offer the fi nest quality product at the best possible price. Included in that price is a lifetime of support from a team of outstanding engineers. The ex•tend•it 2x1 Digital Audio Switcher allows two SPDIF or OPTICAL devices to be switched easily in to one Digital Audio reciever. -
Page 5: Features
FEATURES Features • Switches easily between any two Digital Audio sources • Optional RMT-2 remote control • TOSLINK cables are used to connect the TOSLINK inputs and 2x1 TOSLINK Digital Audio Switcher output • SPDIF cables are used to connect the SPDIF inputs and 2x1 SPDIF Digital Audio Switcher output •... -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS PANEL DESCRIPTIONS Connects to IR Indicates if port 1 or Selects port 1 extender port 2 is selected or port 2 IR eye SPDIF 1 SPDIF 2 OPT 1 OPT 2 Connects to SPDIF Out Optical Out 5VDC power supply... -
Page 7: Connecting And Operating The 2X1 Digital Audio Switcher
5 Plug the 5VDC power supply into the 2x1 Digital Audio Switcher. How to Operate the 2x1 Digital Audio Switcher 1 Use the front panel push button to switch between sources. 2 Alternatively, use the RMT2-IR remote control port to remotely toggle between sources. -
Page 8: Rmt2-Ir Installation
1. Remove battery cover from the back of the RMT2-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. - Page 9 IR Extender Instructions How to Connect the IR Extender to the 2x1 Digital Audio Switcher 1 Open the unit so the circuit board below is accessible. 2 Add a jumper to close the contact between the pins in the white circle 3 Move the jumper in the black circle from the local to the remote pins 4 Plug the IR Extender into the remote jack on the front of the unit...
-
Page 10: Specifi Cations
SPECIFICATIONS Input/Output Connector Type ...S/PDIF and TOSlink S/PDIF (Digital coax) performance ...96 kHz Power Consumption ... 15 Watts (max.) Power Supply ... 5VDC Dimensions ... 4”D x 3.25”W x 1.25”H Shipping Weight ... 2 Lbs... -
Page 11: Warranty
If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...