Gefen Monitor Switcher User Manual
Gefen 1x4 dvi monitor switcher user manual
Hide thumbs
Also See for Monitor Switcher:
- User manual (24 pages) ,
- User manual (12 pages) ,
- User manual (2 pages)
Related Manuals for Gefen Monitor Switcher
Summary of Contents for Gefen Monitor Switcher
- Page 1 1x4 DVI Monitor Switcher U S E R M A N U A L www.gefen.com...
- Page 2 Chatsworth, CA 91311 www.gefen.com support@gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 1x4 DVI Monitor Switcher is a trademark of Gefen Inc.
-
Page 3: Table Of Contents
Introduction Features Panel Descriptions Connecting and Operating the 1x4 DVI Monitor Switcher RMT4-IR Installation Specifi cations Warranty TABLE OF CONTENTS... -
Page 4: Introduction
The ex•tend•it 1x4 DVI Monitor Switcher allows four DVI displays to be switched easily from one DVI source. The 1x4 DVI Monitor Switcher can also be placed at the end of a long DVI cable to regenerate the DVI signal. -
Page 5: Features
• Connects a DVI/HDMI source to multiple DVI or HDMI compatible monitors or projectors • Maintains highest single link video resolution (1920x1200x60hz) • Supports DDWG standard for DVI compliant monitors • Installs in minutes Includes: (1) 1x4 DVI Monitor Switcher (1) 6’ DVI-D cables (m-m) (1) 5VDC Power Supply (1) RMT4-IR... -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS DVI out 2 DVI out 4 LED Indicators DVI out 1 DVI out 3 IR Eye DVI In Contact 5v Power Closure IR Extender Port... -
Page 7: Connecting And Operating The 1X4 Dvi Monitor Switcher
CONNECTING AND OPERATING THE 1X4 DVI MONITOR SWITCHER How to Connect the 1x4 DVI Monitor Switcher to your devices 1 Connect the supplied DVI cable from the DVI source into the 1x4 DVI Monitor Switcher Input. 2 Connect the cables from your displays (monitor or projector) into the DVI Outputs of the 1x4 DVI Monitor Switcher. -
Page 8: Rmt4-Ir Installation
RMT4-IR INSTALLATION 1. Remove battery cover from the back of the RMT4-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. -
Page 9: Specifi Cations
SPECIFICATIONS Video Amplifi er Bandwidth ... 1.65 GHz Input Video Signal ... 1.2 volts p-p Input DDC Signal ... 5 volts p-p (TTL) Single Link Range ... 1920 x 1200 DVI Input/Output Connector Type ... DVI-D Power Consumption ... 15 Watts (max.) Power Supply ... -
Page 10: Warranty
If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...