Something Not Working - Electrolux EKE 5001 Instruction Book

If the appliance is not working correctly, please carry out the following checks, before contacting your
local Electrolux Service Centre.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by
incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Symptoms
The hob hotplate does not heat up
The hotplate is not giving satisfactory results
The oven does not come on
It takes too long to finish the dishes, or they
are cooked too fast
Steam and condensation settle on the food
and the oven cavity
If after these checks, the appliance still does not work, contact your local Service Force Centre. When
you contact the Service Centre, they will need the following information:
1. Your name, address and postcode.
2. Your telephone number
3. Clear and concise details of the fault
4. The model and the serial number (see rating label)
5. Date of purchase

SOMETHING NOT WORKING

Solutions
Check:
that the unit is connected and the electrical
-
supply is switched on
the mains fuse has not blown
-
the correct control knob has been turned.
-
Check:
the hotplate is clean and dry
-
the pan is the correct size for the hotplate
-
the pan has a flat bottom
-
the setting is correct for the type of cooking.
-
Check:
check if a cooking function/temperature has
-
been selected correctly
the socket switch or the switch from the mains
-
supply to the cooker are ON.
Check:
the temperature may need adjusting
-
refer to the contents of this booklet, especially to
-
the chapter "Using the Oven".
Leave dishes inside the oven no longer than 15-
-
20 minutes after the cooking is completed.
23