Table of Contents
Advertisement
10
Cisco SPA Phones User Guide
DNS SRV Auto Prefix
Select Yes.
User ID
PBXware extension number. Example: 1003.
Password
The Secret of the extension as received in the e-mail associated with this
extension. Example: _%Z4M3*Ts9y7. A password is generated automatically
for each newly created extension.
Click on the Submit All Changes button.
You'll have to wait sometime prior for the device to reboot. If everything is done
as above described, you should have successfully registered your phone to
PBXware. Dial *123 to verify registration.
4.2
Auto Provisioning
This chapter describes how to set UAD settings, create PBXware extension and register
the phone using DHCP or Static IP address.
The following topics are covered:
-
UAD Settings
-
Creating Extension
-
Registering Phone
4.2.1
UAD Settings
1. Login to PBXware web administration interface
Open a new browser window and enter the IP address in order to access the
PBXware web administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
2. UAD settings
Navigate to Settings:UAD.
Make sure Cisco SPA UAD is enabled. To check the UAD status click on the edit
icon corresponding to your Cisco SPA phone.
Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP
is set to Yes.
© 2003 - 2012 Bicom Systems
Advertisement
Table of Contents
