Factory Settings - Cisco SPA Phones User Manual

4 Cisco SPA Phones User Guide
Setup button, scroll to Network and press select, scroll to view current IP
address.
For Cisco SPA phone model SPA501G press the Setup button, enter 110, then
press #, the IP address will be recited.
For Cisco SPA phone model SPA525G press the Setup button, select Status,
scroll to Network Status, press Select.
3.4

Factory Settings

1. Reset to factory settings
This step is not required for out-of-the-box phones, however, if the phone has been
already used then it is a must.
Open a new browser window and enter your phone IP address in order to access
the phone web administration interface login screen. Example: http://192.168.1.22
Login to phone web administration interface with your username and password.
Please note, factory default login details are username: admin and password:
admin.
For Cisco SPA phone mode SPA301 lift the handset and enter ****, enter 7373
and press #, press 1 to confirm, hang up to exit and begin the restore process,
phone will be reset to the factory default settings.
For Cisco SPA phone models SPA502G, SPA504G, SPA508G, SPA509G press the
Setup button, scroll to Factory Reset and press select, phone will be reset to
the factory default settings.
For Cisco SPA phone model SPA501G press the Setup button, enter 73738, then
press #, enter 1 to confirm, hang up to exit and begin the restore process, phone
will be reset to the factory default settings.
For Cisco SPA phone model SPA525G press the Setup button, select Device
Administration, scroll to Factory Reset, press Select, phone will be reset to
the factory default settings.
Wait sometime prior for device to reboot.
N O TE
and configurations.
Do not unplug or rem ov e power to the phone while it is updating firm ware
© 2003 - 2012 Bicom Systems