Connecting The Power; Connecting To A Monitor - Advantech PWS-770 User Manual

3.1 Connecting the Power

Before you can use your PWS-770, you must fully charge the battery. Connect the
power adapter as shown and leave to charge for:

A minimum of 2 hours when using the internal battery

A minimum of 8 hours when a second battery is installed
Condition: The operation time is based on the LCD backlight at 50% and the average
utilization of the system under 10%.

3.2 Connecting to a Monitor

You can connect the PWS-770 to an external monitor for enhanced viewing.
Connect one end of a VGA cable to the VGA port on the right side of the PWS-770.
Connect the other end to the VGA port on the monitor.
PWS-770 User Manual 14