Connecting The Power; Connecting To A Monitor - Advantech MIT-W101 User Manual

FCC ID: M82 MITW101

3.1 Connecting the Power

Before you can use your MIT-W101, you must fully charge the battery. Connect the
power adapter as shown and leave to charge for:
• A minimum of 2 hours when using the internal battery
• A minimum of 4 hours when a second battery is installed
Condition: the operation time is based on the LCD backlight at 50% and the average
utilization of the system under 10%.

3.2 Connecting to a Monitor

You can connect the MIT-W101 to an external monitor for enhanced viewing.
Connect one end of a HDMI to VGA cable to the Micro HDMI port on the left side of
the MIT-W101.Connect the other end to the VGA cable and connect to the monitor.
20